fun little project. details in the video.
Showing posts with label Smalls. Show all posts
Showing posts with label Smalls. Show all posts
altoid smalls usb led tester/flash drive
Posted Sunday, April 14, 2013 in altoid, Smalls, testerflash by Mary Farrell
altoid smalls usb led tester/flash drive Video Clips. Duration : 0.92 Mins.
fun little project. details in the video.
fun little project. details in the video.
Altoids smalls - USB Charger EASY - "MintyminiBoost"
Posted Thursday, February 14, 2013 in Altoids, Charger, MintyminiBoost, Smalls by Mary Farrell
Altoids smalls - USB Charger EASY - "MintyminiBoost" Video Clips. Duration : 4.12 Mins.
This video will show you a VERY easy USB charger using an old cell phone car charger, an altoids smalls tin a usb port and a deans connector. This charger will charge at around 5v and 450ma. The power sources can go anywhere from 6v to 16v as the circuit is very versatile. 12v min is required to hit 450ma as anything less will provide only about 250ma. If you have any old cell phone/pda/mp3/game console 12v car adapter you can make this project!
This video will show you a VERY easy USB charger using an old cell phone car charger, an altoids smalls tin a usb port and a deans connector. This charger will charge at around 5v and 450ma. The power sources can go anywhere from 6v to 16v as the circuit is very versatile. 12v min is required to hit 450ma as anything less will provide only about 250ma. If you have any old cell phone/pda/mp3/game console 12v car adapter you can make this project!
Altoids Smalls Tin - Rapid USB Charger "MightyMinty-miniBoost"
Posted Saturday, September 29, 2012 in Altoids, Charger, Smalls by Mary Farrell
Altoids Smalls Tin - Rapid USB Charger "MightyMinty-miniBoost" Tube. Duration : 4.08 Mins.
In this video I show my Altoids smalls tin - Rapid USB Charger project. This is the smallest fully self contained rapid USB device charger I've seen so far, others may have done it but I haven't found them yet. Powering the charger are (2) A123 cells, about 1300mah and good for 2.5 charges on my mobile. The charger puts out around 800ma of current under full charge and takes only 30 mins or so to put a full charge on a 3.7v blackberry curve. I found some a123 cells online for around .00 each and some high capacity rechargeable's are available for only a few dollars more. If anyone is interested in building this please comment and i'll share the details of what was used.
In this video I show my Altoids smalls tin - Rapid USB Charger project. This is the smallest fully self contained rapid USB device charger I've seen so far, others may have done it but I haven't found them yet. Powering the charger are (2) A123 cells, about 1300mah and good for 2.5 charges on my mobile. The charger puts out around 800ma of current under full charge and takes only 30 mins or so to put a full charge on a 3.7v blackberry curve. I found some a123 cells online for around .00 each and some high capacity rechargeable's are available for only a few dollars more. If anyone is interested in building this please comment and i'll share the details of what was used.
Subscribe to:
Posts (Atom)